ProCurve 2610-PWR Technical Information download pdf (Page 44)

100

101

Static Virtual LANs (VLANs)

Port-Based Virtual LANs (Static VLANs)

Default VLAN

and VLAN ID

Figure 2-13. The Default VLAN Names Screen

2. Press [A] (for A

dd). You will then be prompted for a new VLAN name and

VLAN ID:

802.1Q VLAN ID : 1

Name : _

3. Type in a VID (VLAN ID number). This can be any number from 2 to 4094

that is not already being used by another VLAN. (The switch reserves “1”

for the default VLAN.)

Remember that a VLAN must have the same VID in every switch in which

you configure that same VLAN. (GVRP dynamically extends VLANs with

correct VID numbering to other switches. See chapter 3, “GVRP”.)

4. Press [v] to move the cursor to the Name line and type the VLAN name (up

to 12 characters, with no spaces) of a new VLAN that you want to add,

then press

[Enter].

(Avoid these characters in VLAN names:

@, #, $, ^, &, *, (, and ).)

5. Press

[S] (for Save). You will then see the VLAN Names screen with the

new VLAN listed.

2-18

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 363 364

Comments to this Manuals

No comments

ProCurve 2610-PWR Technical Information Page 44

Comments to this Manuals

Related products and manuals for Software ProCurve 2610-PWR