ProCurve 2610-PWR Technical Information download pdf (Page 23)

Getting Started

Conventions

■ Braces within square brackets ( [ < > ] ) indicate a required element

within an optional choice.

■ Boldface indicates use of a CLI command, part of a CLI command

syntax, or other displayed element in general text. For example:

“Use the copy tftp command to download the key from a TFTP server.”

■ Italics indicate variables for which you must supply a value when

executing the command. For example, in this command syntax, < port-

list > indicates that you must provide one or more port numbers:

Syntax: aaa port-access authenticator < port-list >

Command Prompts

In the default configuration, your switch displays a prompt as shown below:

ProCurve Switch 2610#

To simplify recognition, this guide uses ProCurve to represent command

prompts for all models. For example:

ProCurve#

(You can use the hostname command to change the text in the CLI prompt.)

Screen Simulations

Figures containing simulated screen text and command output look like this:

ProCurve> show version

Image stamp: /sw/code/build/info

Nov 2 2007 13 43:14

R.01.XX

430

ProCurve>

Figure 1-1. Example of a Figure Showing a Simulated Screen

In some cases, brief command-output sequences appear outside of a

numbered figure. For example:

ProCurve(config)# ip default-gateway 18.28.152.1/24

ProCurve(config)# vlan 1 ip address 18.28.36.152/24

ProCurve(config)# vlan 1 ip igmp

1-3

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 363 364

No comments

ProCurve 2610-PWR Technical Information Page 23