ProCurve 2610-PWR Technical Information download pdf (Page 47)

100

101

Static Virtual LANs (VLANs)

Port-Based Virtual LANs (Static VLANs)

Ports A4 and A5 are

assigned to both

VLANs.

Ports A6 and A7 are

assigned only to

VLAN-22.

All other ports are

assigned only to the

Default VLAN.

Figure 2-16. Example of VLAN Assignments for Specific Ports

For information on VLAN tags (“Untagged” and “Tagged”), refer to

“802.1Q VLAN Tagging” on page 2-30.

d. If you are finished assigning ports to VLANs, press [Enter] and then [S]

(for S

ave) to activate the changes you've made and to return to the

Configuration menu. (The console then returns to the VLAN menu.)

3. Return to the Main menu.

CLI: Configuring VLAN Parameters

In the factory default state, all ports on the switch belong to the default VLAN

(DEFAULT_VLAN) and are in the same broadcast/multicast domain. (The

default VLAN is also the default primary VLAN—see “The Primary VLAN” on

page 2-7.) You can configure additional static VLANs by adding new VLAN

names, and then assigning one or more ports to each VLAN. (For the maximum

number of VLANs, refer to table 2-1 on page 2-4.) Note that each port can be

assigned to multiple VLANs by using VLAN tagging. (See “802.1Q VLAN

Tagging” on page 2-30.)

2-21

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 363 364

Comments to this Manuals

No comments

ProCurve 2610-PWR Technical Information Page 47

Comments to this Manuals

Related products and manuals for Software ProCurve 2610-PWR