ProCurve 2610-PWR Technical Information download pdf (Page 145)

100

101

Spanning-Tree Operation

802.1D Spanning-Tree Protocol (STP)

3. If the Protocol Version is set to RSTP (as shown in figure 5-15), do the

following:

a. Press [E] (E

dit) to move the cursor to the Protocol Version field.

b. Press the Space bar once to change the Protocol Version field to STP.

c. Press [Enter] to return to the command line.

d. Press

[S] (for Save) to save the change and exit from the Spanning Tree

Operation screen. you will then see a screen with the following:

The asterisk indicates

that you must reboot the

switch to implement the

configuration change

from RSTP to STP.

Figure 5-16. Changing from RSTP to STP Requires a System Reboot

e. Press

[0] (zero) to return to the Main Menu, then [6] to reboot the

switch.

f. After you reboot the switch, enter the menu command at the CLI to

return to the Main Menu, then select:

2. Switch Configuration …

4. Spanning Tree Operation

You will then see the Spanning Tree screen with STP (802.1D) selected

in the Protocol Version field (figure 5-17).

5-37

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 363 364

Comments to this Manuals

No comments

ProCurve 2610-PWR Technical Information Page 145

Comments to this Manuals

Related products and manuals for Software ProCurve 2610-PWR