ProCurve 2610-PWR Technical Information download pdf (Page 50)

Static Virtual LANs (VLANs)

Port-Based Virtual LANs (Static VLANs)

Showing Port Details for VLANs

The show vlan ports detail option allows you to display VLAN memberships on

a per-port basis when a range of ports is specified in the command. In addition,

user-specified port names will be displayed (if assigned), along with tagged or

untagged membership modes.

Syntax: show vlan ports < port-list > [detail]

Displays VLAN information for an individual port or a group of

ports, either cumulatively or on a detailed per-port basis.

port-list: Specify a single port number, a range of ports (for example,

a1-a16), or all.

detail: Displays detailed VLAN membership information on a per-

port basis.

Descriptions of items displayed by the command are provided

below.

Port name: The user-specified port name, if one has been assigned.

VLAN ID: The VLAN identification number, or VID.

Name: The default or specified name assigned to the VLAN. For

a static VLAN, the default name consists of VLAN-x where “x”

matches the VID assigned to that VLAN. For a dynamic VLAN,

the name consists of GVRP_x where “x” matches the applicable

VID.

Status:

Port-Based: Port-Based, static VLAN

Protocol: Protocol-Based, static VLAN

Dynamic: Port-Based, temporary VLAN learned through

GVRP.

Voice: Indicates whether a (port-based) VLAN is configured as a

voice VLAN.

Jumbo: Indicates whether a VLAN is configured for Jumbo

packets. For more on jumbos, refer to the chapter titled “Port

Traffic Controls” in the Management and Configuration Guide for

your switch.

Mode: Indicates whether a VLAN is tagged or untagged.

2-24

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 363 364

No comments

ProCurve 2610-PWR Technical Information Page 50