ProCurve 2610-PWR Technical Information download pdf (Page 231)

Quality of Service (QoS): Managing Bandwidth More Effectively

Using QoS Classifiers To Configure QoS for Outbound Traffic

no qos type-of-service

Disables all ToS classifier operation. Current ToS DSCP

policies and priorities remain in the configuration and will

become available if you re-enable ToS diff-services.

no qos type-of-service [diff-services < codepoint >]

Deletes the DSCP policy assigned to the

< codepoint > and returns the < codepoint > to the 802.1p

priority setting it had before the DSCP policy was assigned.

(This will be either a value from 0 - 7 or

No-override.)

show qos type-of-service

Displays a listing of codepoints, with any corresponding

DSCP policy re-assignments for outbound packets. Also lists

the (802.1p) priority for each codepoint that does not have a

DSCP policy assigned to it.

For example, suppose you want to configure the following two DSCP policies

for packets received with the indicated DSCPs.

Received Policy 802.1p Policy Name

DSCP DSCP Priority (Optional)

001100 000010 6 Level 6

001101 000101 4 Level 4

1. Determine whether the DSCPs already have priority assignments, which

could indicate use by existing applications. This is not a problem as long

as the configured priorities are acceptable for all applications using the

same DSCP. (Refer to the “Note On Changing a Priority Setting” on page

6-61. Also, a DSCP must have a priority configured before you can assign

any QoS classifiers to use it.)

6-41

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 363 364

No comments

ProCurve 2610-PWR Technical Information Page 231