ProCurve 2610-PWR Technical Information download pdf (Page 182)

Spanning-Tree Operation

802.1s Multiple Spanning Tree Protocol (MSTP)

9. To view the current pending MSTP configuration, use the show spanning-

tree pending command (page page 5-80).

Displaying MSTP Statistics and Configuration

Command Page

MSTP Statistics:

show spanning-tree [< port-list >] below

show spanning-tree instance < ist | 1..16 > 76

MSTP Configuration

show spanning-tree [ port-list ] config 77

show spanning-tree [ port-list ] config instance < ist | 1..16 > 78

show spanning-tree mst-config 79

show spanning-tree pending< < instance | ist > | mst-config > page

5-80

Displaying MSTP Statistics

Displaying Switch Statistics for the Common Spanning Tree. This

command displays the MSTP statistics for the connections between MST

regions in a network.

Syntax: show spanning-tree

This command displays the switch’s global and regional

spanning-tree status, plus the per-port spanning-tree

operation at the regional level. Note that values for the

following parameters appear only for ports connected to active

devices: Designated Bridge, Hello Time, PtP, and Edge.

Syntax: show spanning-tree < port-list >

This command displays the spanning-tree status for the

designated port(s). You can list data for a series of ports and

port trunks by specifying the first and last port or trunk of any

consecutive series of ports and trunks. For example, to display

data for port A20-A24 and trk1, you would use this command:

show spanning-tree a20-trk1

5-74

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 363 364

No comments

ProCurve 2610-PWR Technical Information Page 182