ProCurve 2610-PWR Technical Information download pdf (Page 323)

100

101

ProCurve Stack Management

Configuring Stack Management

Figure 8-8. The Default Stack Configuration Screen

3. Move the cursor to the Stack State field by pressing

[E] (for Edit).

4. Do one of the following:

• To disable stacking on the Candidate, use the Space bar to select

the Disabled option, then go to step 5.

Note: Using the menu interface to disable stacking on a Candidate

removes the Candidate from all stacking menus.

• To insert the Candidate into a specific Commander’s stack:

i. Use the space bar to select Member.

ii. Press

[Tab] once to display the Commander MAC Address param-

eter, then enter the MAC address of the desired Commander.

• To change Auto Join or Transmission Interval, use

[Tab] to select the

desired parameter, and:

– To change Auto Join, use the Space bar.

– To change Transmission Interval, type in the new value in the

range of 1 to 300 seconds.

Note: All switches in the stack must be set to the same transmis-

sion interval to help ensure proper stacking operation. ProCurve

recommends that you leave this parameter set to the default 60

seconds.

Then go to step 5.

8-17

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 363 364

Comments to this Manuals

No comments

ProCurve 2610-PWR Technical Information Page 323

Comments to this Manuals

Related products and manuals for Software ProCurve 2610-PWR