ProCurve 6200yl User's Guide download pdf (Page 469)

100

101

13-17

Configuring Port-Based and User-Based Access Control (802.1X)

Configuring Switch Ports as 802.1X Authenticators

1. Enable 802.1X Authentication on Selected Ports

This task configures the individual ports you want to operate as 802.1X

authenticators for point-to-point links to 802.1X-aware clients or switches,

and consists of two steps:

A. Enable the selected ports as authenticators.

B. Specify either user-based or port-based 802.1X authentication.

(Actual 802.1X operation does not commence until you perform step 5 on page

13-23 to activate 802.1X authentication on the switch.)

Note If you enable 802.1X authentication on a port, the switch automatically dis-

ables LACP on that port. However, if the port is already operating in an LACP

trunk, you must remove the port from the trunk before you can configure it

for 802.1X authentication.

A. Enable the Selected Ports as Authenticators and Enable

the (Default) Port-Based Authentication

Syntax: [ no ] aaa port-access authenticator < port-list >

Enables specified ports to operate as 802.1X authenticators

and enables port-based authentication. (To enable user-

based authentication, execute this command first, and then

execute the client-limit < port-list > version of this command

described in the next section.) The no form of the command

removes 802.1X authentication from < port-list >. To activate

configured 802.1X operation, you must enable 802.1X

authentication. Refer to “5. Enable 802.1X Authentication

on the switch” on page 13-23.

1 2 ... 464 465 466 467 468 469 470 471 472 473 474 ... 595 596

Comments to this Manuals

No comments

ProCurve 6200yl User's Guide Page 469

Comments to this Manuals

Related products and manuals for Network switches ProCurve 6200yl