6-21
RADIUS Authentication and Accounting
Using SNMP To View and Configure Switch Authentication Features
Figure 6-7. Disabling SNMP Access to the Authentication MIB and Displaying the Result
An alternate method of determining the current Authentication MIB access
state is to use the show run command.
Figure 6-8. Using the show run Command to View the Current Authentication MIB Access State
ProCurve(config)# show run
Running configuration:
; J8697A Configuration Editor; Created on release #K.12.01
hostname "ProCurve"
snmp-server mib hpSwitchAuthMIB excluded
ip default-gateway 10.10.24.55
snmp-server community "public" Operator
vlan 1
name "DEFAULT_VLAN"
untagged A1-A24,B1-B4
ip address 10.10.24.100 255.255.255.0
exit
password manager
Indicates that SNMP access to the
authentication configuration MIB
(hpSwitchAuth) is disabled.
Comments to this Manuals