ProCurve 6200yl User's Guide download pdf (Page 534)

100

101

14-20

Configuring and Monitoring Port Security

Port Security

Adding an Authorized Device to a Port. To simply add a device (MAC

address) to a port’s existing Authorized Addresses list, enter the port number

with the mac-address parameter and the device’s MAC address. This assumes

that Learn Mode is set to static and the Authorized Addresses list is not full

(as determined by the current Address Limit value). For example, suppose

port A1 allows two authorized devices, but has only one device in its Autho-

rized Address list:

Figure 14-5. Example of Adding an Authorized Device to a Port

With the above configuration for port A1, the following command adds the

0c0090-456456 MAC address as the second authorized address.

ProCurve(config)# port-security a1 mac-address 0c0090-

456456

After executing the above command, the security configuration for port A1

would be:

Figure 14-6. Example of Adding a Second Authorized Device to a Port

The Address Limit has not

been reached.

Although the

Address Limit is set

to 2, only one device

has been authorized

for this port. In this

case you can add

another without

having to also

increase the Address

Limit.

The Address Limit has been

reached.

1 2 ... 529 530 531 532 533 534 535 536 537 538 539 ... 595 596

Comments to this Manuals

No comments

ProCurve 6200yl User's Guide Page 534

Comments to this Manuals

Related products and manuals for Network switches ProCurve 6200yl