HP ProCurve Switch 8200zl/5400zl/3500 SeriesOrdering Guide
RPS/EPS and console cablesThe HP ProCurve 620 Redundant/External Power Supply (J8696A) and the HP ProCurve Switch zl Power Supply Shelf (J8714A) use c
Jumper cables (PDU to product)If power interconnects between a switch and a power distribution device, such as a power distribution unit (PDU) or an u
Technology for better business outcomesTo learn more, visit www.hp.com/go/procurve© Copyright 2007, 2009 Hewlett-Packard Development Company, L.P. The
Part 1: zl series chassis power supply selection (PoE)2The HP ProCurve Switch 8200zl/5400zl/3500 series can power any device that adheres to the IEEE
3Step 2: Determine your future PoE power needsPoE power: If you would like to plan for future PoE power needs now, determine how much extra PoE power
4Step 3: Determine the required level of redundant powerSee Table 2 for definitions of the various levels of redundancy. No redundancy: Skip to Step
Step 4: Choose your power supply or suppliesThere are three power supplies available for the HP ProCurve Switch 8200zl and 5400zl series.Table 3. HP
Power cordsThe power cords available for these switches are sized for the increased current that can be drawn to meet the needs of PoE. As a result, t
Part 2: Software licensesThe HP ProCurve Switch 8200zl, 5400zl, and 3500 series use the same software image base and ship with Intelligent Edge and IP
Software updates1 for existing customersIn keeping with the longstanding value from HP ProCurve Networking, software updates when provided will be fre
Fan trayHP ProCurve Switch 8200zl/5400zl series fan trays can be hot-swapped without system disruption as long as the new tray is installed within thr
Comments to this Manuals