ProCurve 6200yl User's Guide Page 360

  • Download
  • Add to my manuals
  • Print
  • Page
    / 596
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 359
10-74
Access Control Lists (ACLs)
Configuring Extended ACLs
Figure 10-19. Example of Configuration Commands for Extended ACLs
Configuring Numbered, Extended ACLs
This section describes the commands for performing the following in a
numbered, extended ACL:
creating the ACL by entering the first ACE in the list
appending a new ACE to the end of an existing ACL
For other ACL topics, refer to the following:
ProCurve(config)# ip access-list extended Extended-List-02
ProCurve(config-ext-nacl)# permit tcp host 10.10.20.100 host
10.10.30.55 eq ftp
ProCurve(config-ext-nacl)# deny tcp 10.10.20.1/24 any eq ftp log
ProCurve(config-ext-nacl)# permit ip any any
ProCurve(config-ext-nacl)# exit
ProCurve(config)# vlan 20 ip access-group Extended-List-02 in
ProCurve(config)# ip access-list extended Extended-List-01
ProCurve(config-ext-nacl)# permit tcp host 10.10.10.44 host
10.10.20.78 eq telnet
ProCurve(config-ext-nacl)# deny ip 10.10.10.1/24 10.10.20.1/24
ProCurve(config-ext-nacl)# permit ip any any
ProCurve(config-ext-nacl)# exit
ProCurve(config)# vlan 10 ip access-group Extended-List in
A (Refer to figure 10-18 on page
B (Refer to figure 10-18 on page
Topic Page
configuring named, standard ACLs 10-53
configuring numbered, standard ACLs 10-56
configuring named, extended ACLs 10-62
applying or removing an ACL on an interface 10-81
deleting an ACL 10-85
editing an ACL 10-86
sequence numbering in ACLs 10-87
including remarks in an ACL 10-92
displaying ACL configuration data 10-96
creating or editing ACLs offline 10-104
enabling ACL “Deny” logging 10-109
Page view 359
1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 595 596

Comments to this Manuals

No comments