ProCurve 6200yl User's Guide download pdf (Page 502)

100

101

13-50

Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

Figure 13-8. Example of show port-access authenticator config Command

Table 13-3. Field Descriptions of show port-access authenticator config Command Output (Figure 13-9)

Field Description

Port-access

authenticator activated

Whether 802.1X authentication is enabled or disabled on specified port(s).

Port Port number on switch.

Re-auth Period Period of time (in seconds) after which clients connected to the port need to be re-

authenticated.

Access Control Port’s authentication mode:

Auto: Network access is allowed to any connected device that supports 802.1X authentication

and provides valid 802.1X credentials.

Authorized: Network access is allowed to any device connected to the port, regardless of

whether it meets 802.1X criteria.

Unauthorized: Network access is blocked to any device connected to the port, regardless of

whether the device meets 802.1X criteria.

Max reqs Number of authentication attempts that must time-out before authentication fails and the

authentication session ends.

Quiet Period Period of time (in seconds) during which the port does not try to acquire a supplicant.

TX Timeout Period of time (in seconds) that the port waits to retransmit the next EAPOL PDU during an

authentication session.

Suppliant Timeout Period of time (in seconds) that the switch waits for a supplicant response to an EAP request.

Server Timeout Period of time (in seconds) that the switch waits for a server response to an authentication

request.

Cntrl Dir Directions in which flow of incoming and outgoing traffic is blocked on 802.1X-aware port that

has not yet entered the authenticated state:

Both: Incoming and outgoing traffic is blocked on port until authentication occurs.

In: Only incoming traffic is blocked on port before authentication occurs. Outgoing traffic with

unknown destination addresses is flooded on the unauthenticated 802.1X-aware port.

ProCurve(config)# show port-access authenticator config

Port Access Authenticator Configuration

Port-access authenticator activated [No] : No

| Re-auth Access Max Quiet TX Supplicant Server Cntrl

Port | Period Control Reqs Period Timeout Timeout Timeout Dir

---- + ------- -------- ----- ------- -------- ---------- -------- -----

1 | No Auto 2 60 30 30 30 both

2 | No Auto 2 60 30 30 30 in

1 2 ... 497 498 499 500 501 502 503 504 505 506 507 ... 595 596

Comments to this Manuals

No comments

ProCurve 6200yl User's Guide Page 502

Comments to this Manuals

Related products and manuals for Network switches ProCurve 6200yl