10-97
Access Control Lists (ACLs)
Displaying ACL Configuration Data
Display an ACL Summary
This command lists the configured ACLs, regardless of whether they are
assigned to any VLANs.
For example:
Figure 10-32. Example of a Summary Table of Access lists
Syntax: show access-list
List a summary table of the name, type, and application status
of all ACLs configured on the switch.
Term Meaning
Type Shows whether the listed ACL is
std (Standard; source-address only) or ext
(Extended; protocol, source, and destination data).
Appl Shows whether the listed ACL has been applied to a VLAN (
yes/no).
Name Shows the identifier (name or number) assigned to each ACL configured in the switch.
ProCurve(config)# show access-list
Access Control Lists
Type Appl Name
---- ---- ------------------------------------------
std yes List-01-Inbound
ext no List-02-Outbound
std yes 55
In this switch, the ACL named “List-02-
Outbound” exists in the configuration but is
not applied to any VLANs and thus does not
affect traffic.
Comments to this Manuals