ProCurve 6200yl User's Guide download pdf (Page 262)

100

101

8-26

Configuring Secure Shell (SSH)

Further Information on SSH Client Public-Key Authentication

For example, if you wanted to copy a client public-key file named clientkeys.txt

from a TFTP server at 10.38.252.195 and then display the file contents:

Figure 8-14. Example of Copying and Displaying a Client Public-Key File Containing Two Different Client

Public Keys for the Same Client

Replacing or Clearing the Public Key File. The client public-key file

remains in the switch’s flash memory even if you erase the startup-config file,

reset the switch, or reboot the switch.

■ You can remove the existing client public-key file or specific keys by

executing the clear crypto public-key command.

Syntax: clear crypto public-key

Deletes the client-public-key file from the switch.

Syntax: clear crypto public-key 3

Deletes the entry with an index of 3 from the

client-public-key file on the switch.

Enabling Client Public-Key Authentication. After you TFTP a client-

public-key file into the switch (described above), you can configure the switch

to allow the following:

■ If an SSH client’s public key matches the switch’s client-public-key

file, allow that client access to the switch. If there is not a public-key

match, then deny access to that client.

Key Index Number

Syntax: aaa authentication ssh login public-key none

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 595 596

Comments to this Manuals

No comments

ProCurve 6200yl User's Guide Page 262

Comments to this Manuals

Related products and manuals for Network switches ProCurve 6200yl