ProCurve 6200yl User's Guide download pdf (Page 451)

100

101

12-23

Traffic/Security Filters and Monitors

Configuring Traffic/Security Filters

Displaying Traffic/Security Filters

This command displays a listing of all filters by index number and also enables

you to use the index number to display the details of individual filters.

For example, to display the filters created in figure 12-8 on page 12-22 and then

list the details of the multicast filter for multicast address 010000-224466:

Syntax: show filter

Lists the filters configured in the switch, with

corresponding filter index (IDX) numbers.

IDX: An automatically assigned index number used to

identify the filter for a detailed information listing. A

filter retains its assigned IDX number for as long as the

filter exists in the switch. The switch assigns the lowest

available IDX number to a new filter. This can result in

a newer filter having a lower IDX number than an older

filter if a previous filter deletion created a gap in the filter

listing.

Filter Type: Indicates the type of filter assigned to the IDX

number (source-port, multicast, or protocol).

Value: Indicates the port number or port-trunk name of the

source port or trunk assigned to the filter

[ index ]

Lists the filter type and other data for the filter corre-

sponding to the index number in the show filter output. Also

lists, for each outbound destination port in the switch, the

port number, port type, and filter action (forward or drop).

The switch assigns the lowest available index number to a

new filter. If you delete a filter, the index number for that

filter becomes available for the next filter you create.

1 2 ... 446 447 448 449 450 451 452 453 454 455 456 ... 595 596

Comments to this Manuals

No comments

ProCurve 6200yl User's Guide Page 451

Comments to this Manuals

Related products and manuals for Network switches ProCurve 6200yl