ProCurve 6200yl User's Guide download pdf (Page 435)

100

101

12-7

Traffic/Security Filters and Monitors

Filter Types and Operation

■ A named source-port filter can only be deleted when it is not applied

to any ports.

Defining and Configuring Named Source-Port Filters

The named source-port filter command operates from the global configuration

level.

Syntax: [no] filter source-port named-filter <filter-name>

Defines or deletes a named source-port filter. The <filter-

name> may contain a maximum of 20 alpha-numeric

characters (longer names may be specified, but they are not

displayed.) A filter-name cannot be a valid port or port trunk

name.

The maximum number of named source-port filters that can

be used is equal to the number of ports on a switch.

A named source-port filter can only be removed if it is not in

use (use the show filter source-port command to check the

status). Named source-port filters are not automatically

deleted when they are no longer used.

Use the no option to delete an unused named source-port filter.

Syntax: filter source-port named-filter <filter-name > drop < destination-port-list >

Configures the named source-port filter to drop traffic having

a destination on the ports and/or port trunks in the <

destination-port-list >. Can be followed by the forward option

if you have other destination ports or port trunks previously

set to drop that you want to change to forward. For example:

filter source-port named-filter <filter-name > drop < destina-

tion-port-list > forward < destination-port-list>

The destination-port-list may contain ports, port trunks, and

ranges (for example 3-7 or trk4-trk9) separated by commas.

Syntax: filter source-port named-filter <filter-name > forward

< destination-port-list >

Configures the named source-port filter to forward traffic

having a destination on the ports and/or port trunks in the

<destination-port-list>. Since “forward” is the default state for

destinations in a filter, this command is useful when

destinations in an existing filter are configured for “drop”

and you want to change them to ”forward”. Can be followed

by the drop option if you have other destination ports set to

forward that you want to change to drop. For example:

filter source-port named-filter <filter-name > forward <

destination-port-list > drop < destination-port-list >

1 2 ... 430 431 432 433 434 435 436 437 438 439 440 ... 595 596

Comments to this Manuals

No comments

ProCurve 6200yl User's Guide Page 435

Comments to this Manuals

Related products and manuals for Network switches ProCurve 6200yl