ProCurve 6200yl User's Guide Page 364

  • Download
  • Add to my manuals
  • Print
  • Page
    / 596
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 363
10-78
Access Control Lists (ACLs)
Configuring Extended ACLs
[ precedence < 0 - 7 | precedence-name >]
This option causes the ACE to match packets with the
specified IP precedence value. Values can be entered as the
following IP precedence numbers or alphanumeric names:
0 or routine
1 priority
2 immediate
3 flash
4 flash-override
5 critical
6 internet (for internetwork control)
7 network (for network control)
Note: The precedence criteria described in this section are
applied in addition to
any other selection criteria config-
ured in the same ACE.
[ tos ]
This option can be used after the DA to cause the ACE to
match packets with the specified IP Type-of-Service (ToS)
setting. ToS values can be entered as the following numeric
settings or, in the case of 0, 2, 4, and 8, as alphanumeric
names:
0 or normal
2 max-reliability
4 max-throughput
6
8 minimize-delay
10
12
14
Note: The ToS criteria in this section are applied in addi-
tion to any other criteria configured in the same ACE.
[log]
Optional; generates an Event Log message if:
The action is deny. (This option is not configurable for
Permit.)
There is a match.
ACL logging is enabled on the switch. (Refer to
“Enabling ACL Logging on the Switch” on page 10-111)
Page view 363
1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 595 596

Comments to this Manuals

No comments