ProCurve 2610-PWR Specifications download pdf (Page 25)

2-1

Installing the Switch

The ProCurve 2610 Switches come with an accessory kit that includes the

brackets for mounting the switch in a standard 19-inch telco rack, in an

equipment cabinet, or on a wall. The brackets are designed to allow mounting

the switch in a variety of locations and orientations. Rubber feet are provided

that can be attached so the switch can be securely located on a horizontal

surface.

This chapter shows how to install the Switch 2610.

Included Parts

The 2610 Switches have the following components:

■ HP ProCurve Switch Quick Setup Sheet

■ Read Me First

■ HP ProCurve Switches General Safety and Regulatory Information

booklet

■ 2610 Switch Specific Safety and Regulatory Information sheet

■ Console cable

■ Customer Support/Warranty booklet

■ Accessory kits:

2610 Non-PWR switches and the

J9086A 24/12-port partial PoE

switch

2610-PWR switches, J9087A

and J9089A

Kit number 5069-6535

Contains:

• two mounting brackets

• eight 8-mm M4 screws to attach the

mounting brackets to the switch

• four 5/8-inch number 12-24 screws to

attach the switch to a rack

• four rubber feet

Kit number 5069-5705

Contains:

• two mounting brackets

• eight 8-mm M4 screws to attach the

mounting brackets to the switch

• four 5/8-inch number 12-24 screws to

attach the switch to a rack

• four rubber feet

The mounting brackets in this kit are longer to support the increased depth of the 2610-

PWR products.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 111 112

No comments

ProCurve 2610-PWR Specifications Page 25